Browse Categories

Parker E850P210QML90XX1 10Q Microglass EPR Hydraulic Filter

Item #: E850P210QML90XX1

Product Info

Parker Hannifin

Modern high pressure hydraulic systems are demanding. Better controls and long component life are expected. To deliver the high standards of performance, hydraulic components are built with tighter tolerances increasing their sensitivity to contamination.

That’s where Parker Pressure Filters come into play. Pressure filters are used to protect downstream components from contamination, protecting these critical components from catastrophic failure. They filter out ingressed contamination before it jams a valve or scores a cylinder. They block pump-generated debris before it gets to servo or proportional valves.


  • Meets SAE HF4 Specification for Automotive Uses
  • O-Ring Seal
  • Positive o-ring Sealing for Optimum Element Efficiency
  • Plastic End Caps
  • Laser Marked for Clear Long-Lasting Identification – Excellent Corrosion Protection
  • Spiral Support Cylinders
  • High Strength Consistent Support
  • Continuous Length Elements Eliminates Leak Points and Increases Surface Area
  • Base Mounted Filter
  • No brackets required for installation, reducing costs
  • Top Access Cover
  • Removes element from top, reducing mess
  • Lighter than removing the entire bowl
  • Visual and Electrical Indicators
  • Know exactly when Element service is required
  • Drain Port
  • Drain all Oil from Assembly Prior to Servicing, Eliminates Cross-Contamination
  • Vent Port
  • Purges all Trapped Air in Filter, Achieving Maximum Element Performance and Prevents a “Spongy” System
  • Microglass III Elements – Available in Four Different Micron Sizes
  • Documented Consistent Performance, Backed by Recognized Test Standards – Providing Reliability
  • Multi-Layer Media – Offering High Capacity and Efficiency
  • Wire Reinforced Pleats – No Performance Loss from Pleat Bunching

Typical Applications:

  • Automotive specified equipment
  • Hydrostatic transmission circuits
  • Servo and proportional controls
  • Offshore drilling rigs
  • Mining equipment
  • Power units

Item Specifications

  • 90 psi 6.2 Bar
  • 10Q Microglass
  • 110 gpm 416 lpm
  • 81 psid (5.6 Bar)
  • Visual, Left Side
  • Hydraulic Filter
  • Filtration
  • 1 3/8 manifold Ports on bottom of filter base
  • EPR


Have Questions?

Ask our experts: