| UOM | EA | Seal Material | Nitrile |
| Actuation Type | Electrical, Manual | Configuration | Normally Closed, Pressure Compensated |
| Flow Rate | 2 GAL/MIN, 7.5 L/MIN | Variation of Closing Point | N/A |
| Function | Proportional Flow Control/Regulator | Wire Mesh Screen Included | Yes |
| Flow Direction | Top to Side (3 - 2) | Connection Size | N/A |
| Seal Material | Nitrile | Valve Material | All parts steel. All operating parts hardened steel |
| Maximum Inlet Pressure Rating | 3000 psi | Leak Rate | 570 @ 3000 PSI (210 BAR) cm3/min |
| Minimum Pressure Differential | 150 psi | Hysteresis | < 10% |
| Maximum Operating Temperature | +250 °F | Override Functionality | Infinite Control |
| Cavity Size | C08-3 | Minimum Operating Temperature | -34 °C |
| Current | Max: 1.15 @ 12 VDC, 0.58 @ 24 VDC A | Power Consumption | 14 W |
| Coil Nut Tightening Torque | 4.1 Nm | Weight | 0.17 lb |
| Maximum Operating Pressure | 210 bar | Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 |
| Flow Rate Accuracy | Up to 20% | Body Material | N/A |
| Actuation Type | Electrical, Manual | Configuration | Normally Closed, Pressure Compensated |
| Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) | Variation of Opening Point | 25% of Input Signal |
| Operating Temperature | -30 to +250 °F | Flow Rate | 7.5 L/min |
| Frequency | 100-400 Hz | Coil Type | 1/2" Super Coil Low Watt (CCS) |
| Division | Hydraulic Cartridge Systems Division | Connection Type | N/A |
| Maximum Flow Rate | 2.0 Gal/min | For Fluid Type | Mineral-based or synthetic hydraulic fluids |
| Installation Torque | 20 lb-ft | Operation Type | Solenoid operated, Manually operated |
| Division | Hydraulic Systems Division | | |
