| UOM | EA | Seal Material | Nitrile |
| Actuation Type | Electrical | Configuration | Normally Closed, Pressure Compensated |
| Flow Rate | 4, 6 GAL/MIN, 15, 23 L/MIN | Connection Type | N/A |
| Coil Type | 1/2" Super Coil | Body Material | N/A |
| Division | Hydraulic Systems Division | Flow Rate Accuracy | Up to 20% |
| Weight | 0.08 kg | Installation Torque | 20 lb-ft |
| Operation Type | Solenoid operated | Connection Size | N/A |
| Minimum Pressure Differential | 200, 300 psi | Maximum Inlet Pressure Rating | 210 bar |
| Seal Material | Nitrile | Maximum Operating Temperature | +250 °F |
| Leak Rate | 570 @ 3000 PSI (210 BAR) cm3/min | For Fluid Type | Mineral-based or synthetic hydraulic fluids |
| Hysteresis | < 3%, < 10% | Valve Material | All parts steel. All operating parts hardened steel |
| Maximum Flow Rate | 4, 6 Gal/min | Frequency | 100-400 Hz |
| Division | Hydraulic Cartridge Systems Division | Power Consumption | 14, 19 W |
| Cavity Size | C08-3 | Minimum Operating Temperature | -30 °F |
| Current | Max: 1.15 @ 12 VDC, 1.58 @ 12 VDC, 0.58 @ 24 VDC, 0.79 @ 24 VDC A | Override Functionality | N/A |
| Flow Direction | Top to Side (3 - 2) | Function | Proportional Flow Control/Regulator |
| Wire Mesh Screen Included | No | Variation of Closing Point | N/A |
| Actuation Type | Electrical | Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 |
| Operating Temperature | -34 to +121 °C | Maximum Operating Pressure | 3000 psi |
| Coil Nut Tightening Torque | 4.1 Nm | Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) |
| Configuration | Normally Closed, Pressure Compensated | Variation of Opening Point | 25% of Input Signal |
| Flow Rate | 4, 6 Gal/min | | |
