| UOM | EA | Seal Material | Fluorocarbon |
| Actuation Type | Electrical | Flow Rate | 2.5 GAL/MIN, 9.5 L/MIN |
| Configuration | Normally Open, Pressure Compensated | Coil Type | 1/2" Super Coil Low Watt (CCS) |
| Connection Type | N/A | Operation Type | Solenoid operated |
| Flow Rate Accuracy | +/- 7% | Weight | 0.17 lb |
| Division | Hydraulic Systems Division | Body Material | N/A |
| Installation Torque | 27 Nm | Seal Material | Fluorocarbon |
| Maximum Inlet Pressure Rating | 3000 psi | Minimum Pressure Differential | 10.3 bar |
| Function | Proportional Flow Control/Regulator | Connection Size | N/A |
| Frequency | 100-400 Hz | Maximum Flow Rate | 2.5 Gal/min |
| Division | Hydraulic Cartridge Systems Division | Leak Rate | 570 @ 3000 PSI (210 BAR) cm3/min |
| Hysteresis | < 3% | For Fluid Type | Mineral-based or synthetic hydraulic fluids |
| Maximum Operating Temperature | +204 °C | Valve Material | All parts steel. All operating parts hardened steel |
| Minimum Operating Temperature | -15 °F | Override Functionality | N/A |
| Power Consumption | 14 W | Cavity Size | C08-3 |
| Current | Max: 1.15 @ 12 VDC, 0.58 @ 24 VDC A | Variation of Closing Point | 75% of Input Signal |
| Flow Direction | Top to Side (3 - 2) | Wire Mesh Screen Included | No |
| Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) | Configuration | Normally Open, Pressure Compensated |
| Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 | Coil Nut Tightening Torque | 4.1 Nm |
| Maximum Operating Pressure | 210 bar | Actuation Type | Electrical |
| Operating Temperature | -26 to +204 °C | Flow Rate | 9.5 L/min |
| Variation of Opening Point | N/A | | |
