| UOM | EA | Seal Material | Nitrile |
| Flow Rate | 5 GAL/MIN, 19 L/MIN | Actuation Type | Electrical, Manual |
| Configuration | Normally Open, Pressure Compensated | Body Material | N/A |
| Flow Rate Accuracy | Up to 20% | Maximum Operating Pressure | 210 bar |
| Weight | 0.08 kg | Installation Torque | 20 lb-ft |
| Variation of Opening Point | N/A | Actuation Type | Electrical, Manual |
| Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 | Operating Temperature | -30 to +250 °F |
| Coil Nut Tightening Torque | 4.1 Nm | Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) |
| Configuration | Normally Open, Pressure Compensated | Maximum Operating Temperature | +250 °F |
| Leak Rate | 570 @ 3000 PSI (210 BAR) cm3/min | For Fluid Type | Mineral-based or synthetic hydraulic fluids |
| Frequency | 100-400 Hz | Connection Type | N/A |
| Maximum Flow Rate | 19.0 L/min | Division | Hydraulic Cartridge Systems Division |
| Coil Type | 1/2" Super Coil High Watt (CCP) | Division | Hydraulic Systems Division |
| Operation Type | Solenoid operated, Manually operated | Connection Size | N/A |
| Flow Direction | Top to Side (3 - 2) | Wire Mesh Screen Included | No |
| Function | Proportional Flow Control/Regulator | Variation of Closing Point | 75% of Input Signal |
| Minimum Pressure Differential | 20.7 bar | Maximum Inlet Pressure Rating | 210 bar |
| Hysteresis | < 3% | Valve Material | All parts steel. All operating parts hardened steel |
| Seal Material | Nitrile | Flow Rate | 5 Gal/min |
| Override Functionality | Infinite Control | Power Consumption | 19 W |
| Current | Max: 1.58 @ 12 VDC, 0.79 @ 24 VDC A | Cavity Size | C08-3 |
| Minimum Operating Temperature | -30 °F | | |
