| UOM | EA | Seal Material | Nitrile |
| Actuation Type | Electrical | Configuration | Normally Closed, Pressure Compensated |
| Flow Rate | 8, 9.5 GAL/MIN, 30, 36 L/MIN | Division | Hydraulic Systems Division |
| Body Material | N/A | Installation Torque | 30 Nm |
| Operation Type | Solenoid operated | Operating Temperature | -34 to +121 °C |
| Actuation Type | Electrical | Flow Rate Accuracy | Up to 20% |
| Configuration | Normally Closed, Pressure Compensated | Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 |
| Coil Nut Tightening Torque | 3 lb-ft | Weight | 0.28 lb |
| Maximum Operating Pressure | 3000 psi | Hysteresis | 7% |
| Maximum Operating Temperature | +250 °F | Valve Material | All parts steel. All operating parts hardened steel |
| Seal Material | Nitrile | Maximum Flow Rate | 8, 9.5 Gal/min |
| Minimum Pressure Differential | 13.8, 20.7 bar | Leak Rate | 780 @ 3000 PSI (210 BAR) cm3/min |
| For Fluid Type | Mineral-based or synthetic hydraulic fluids | Coil Type | 5/8" Super Coil |
| Frequency | 100-400 Hz | Connection Type | N/A |
| Division | Hydraulic Cartridge Systems Division | Flow Direction | Top to Side (3 - 2) |
| Power Consumption | 18, 28 W | Connection Size | N/A |
| Function | Proportional Flow Control/Regulator | Wire Mesh Screen Included | Yes |
| Variation of Closing Point | N/A | Maximum Inlet Pressure Rating | 210 bar |
| Flow Rate | 8, 9.5 Gal/min | Variation of Opening Point | 25% of Input Signal |
| Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) | Override Functionality | N/A |
| Current | Max: 1.50 @ 12 VDC, 2.33 @ 12 VDC, 0.75 @ 24 VDC, 1.17 @ 24 VDC A | Cavity Size | 3X |
| Minimum Operating Temperature | -30 °F | | |
