| UOM | EA | Seal Material | Nitrile |
| Actuation Type | Electrical | Flow Rate | 9.5 GAL/MIN, 36 L/MIN |
| Configuration | Normally Open, Pressure Compensated | Coil Type | 5/8" Super Coil High Watt (CAP) |
| Connection Type | N/A | Installation Torque | 22 lb-ft |
| Operation Type | Solenoid operated | Flow Rate Accuracy | Up to 20% |
| Weight | 0.28 lb | Body Material | N/A |
| Division | Hydraulic Systems Division | Seal Material | Nitrile |
| Maximum Inlet Pressure Rating | 3000 psi | Function | Proportional Flow Control/Regulator |
| Connection Size | N/A | Frequency | 100-400 Hz |
| Division | Hydraulic Cartridge Systems Division | Leak Rate | 780 @ 3000 PSI (210 BAR) cm3/min |
| Maximum Flow Rate | 36.0 L/min | For Fluid Type | Mineral-based or synthetic hydraulic fluids |
| Hysteresis | 7% | Minimum Pressure Differential | 13.8 bar |
| Maximum Operating Temperature | +250 °F | Valve Material | All parts steel. All operating parts hardened steel |
| Minimum Operating Temperature | -30 °F | Override Functionality | N/A |
| Current | Max: 2.33 @ 12 VDC, 1.17 @ 24 VDC A | Cavity Size | 3X |
| Power Consumption | 28 W | Variation of Closing Point | 25% of Input Signal |
| Flow Direction | Top to Side (3 - 2) | Wire Mesh Screen Included | Yes |
| Configuration | Normally Open, Pressure Compensated | Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) |
| Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 | Coil Nut Tightening Torque | 3 lb-ft |
| Maximum Operating Pressure | 210 bar | Operating Temperature | -34 to +121 °C |
| Actuation Type | Electrical | Variation of Opening Point | N/A |
| Flow Rate | 36 L/min | | |
